In this particular Netgear routerlogin.net guide, today we will show you how to log in to your Netgear router, and which are the best options you should tweak to make sure you are achieving one of the fastest and highly secured wireless network speeds attainable. Might you are using the Netgear wireless/wired router and set it up and haven’t even found any reason to go back into the router’s configuration menus ever since you have setup.
But now maybe you have stuck with the same boring internet speed of the same broadband service provider for ages, and now, in the end, you have decided to switch to a better internet deal – but you have forgotten how to log in back to your Netgear device with the help of routerlogin.net
This particular article section is for those who are facing the routerlogin.net not working problem or any similar predicament or a difficult.
Whatever your reason behind the failure of Netgear router login with default IP address 192.168.1.1 or with URL. We will help you to log in with clear and easy steps.
There are two major methods via which you can easily log in to your Netgear device; either with the help of your PC’s web browser or with using a dedicated app presents in your smartphone.
How to Perform Netgear Router Log in from Desktop
Primary Netgear Router Login Procedure
Firstly, you will have to open any of your favourite web browsers, it doesn’t matter which one. Then simply type www.routerlogin.net in the address bar.
You will then see the router login window, which is asking for login credentials. If your Netgear router login window fails to appear, then type http://www.routerlogin.com in the address bar for logging in.
Alternative Netgear Router Login Procedure with IP Address
If your Routerlogin.net not working, then another best method is you can use the default IP address 192.168.1.1 in the URL bar of your favourite browser.
The IP address is a 16-digit figure number, divided into four segments with dot “.” in between. Typically it looks like something 192.168.xxxx.xxxx where the last two numbers can vary device to device.
Somehow the IP address might be mentioned down in your Netgear router’s guide booklet, or at the back or behind the device. But if not, you can easily find it out using your desktop or laptop, all you need to connect your desktop or laptop with the router and just follow the simple easy procedure.
- Press Win + R key and type CMD
- Tap the Enter key.
- Now all you need type a simple command i.e. “ipconfig” is case-sensitive.
- Again the Enter button.
- A string of information will display on the CMD window. Note down the IP address mentioned in front of the Default Gateway (It is usually present at the bottom).
Before proceeding for the further router’s settings make sure you have the latest version of Netgear
Try to Log In to Netgear Router with Smartphone’s App
Now your old Netgear Genie app has been replaced with Nighthawk app, so all you need to upgrade your Netgear app from the Apple Store or Google Play.
- Download and install the Nighthawk app on your smartphone or tablet.
- Once it has been installed, run the application and accept all the terms and conditions.
- Now try to login with the same login credentials that you have mentioned before to proceed via desktop. Make sure your smartphone is connected with your router device.
- Now you can easily reconfigure your Netgear router with a handly smartphone device.
We hope this particular blog section helps you to figure out all your basic queries regarding the Netgear device failure. If somehow if you still facing any kind of trouble regarding your Netgear device feel free to share with your through comments. Your comments and feedback are really valuable to us.